How Do I Make My Helmet Visor Not Foggy? Best Guide

The most frequent problem for a motorcycle riders is fogging up on the helmet visor. while Driving on the heavy traffic roads while your helmet visor is fogged up is a dangerous. It may be more risky to wear glasses when wearing a helmet because doing so blurs your spectacles. How then can I prevent fogging in my helmet visor?

Although many advise briefly pausing breathing or removing the visor, I don’t think those are the best options for you. The ventilation system can be opened or increased, but having an anti-fog visor insert or pinlock visor is crucial.

To achieve a rapid fix and a safe travel with your helmet visor that isn’t foggy while on the road, this can be only possible when you use anti-fog products.

What’s The Main Causes Of Helmet Visor Fogging?

The climatic conditions in your area are the primary causes of fogging on the helmet visor. Your helmet’s visor may be affected by certain factors:

  • Cold weather
  • Heavy Raining
  • Higher humidity levels

The change in temperature is always linked with fogging up to the helmet visor. The temperature difference between the inside of the helmet and the outside environment may be the main cause of this. Helmet fogging is a frequent occurrence during cold and rainy seasons.

A few droplets of moisture within your helmet visor can be seen due to the temperature difference. Simply said, when it’s rainy or cold outside and at the same time, your warm breath from exhaling causes fogging of the visor.

We all engaged in similar behavior when we were younger. On a chilly winter day, as we exhale, a blast of smoke or fog emerges from our mouths. The condensation on your visor is caused in a manner similar to this when your warm breath contacts the chilly visor.

When the outside air is more humid than the inside, your visor may occasionally become fogged up from the outside. However, the issue of how to prevent fogging in my helmet visor still exists. You must get rid of the condensation for these problems to be resolved. You’ll find a lots of good solutions to prevent the fogging problem in this article.

How Do I Make My Helmet Visor Not Foggy?

A helmet is a motorcycle rider’s must-have accessory. If you wear glasses while wearing a motorcycle helmet, it’s conceivable that the inside of your glass or visor will fog up, making it difficult for you to ride. As we previously mentioned, if the weather is bad or you are breathing warm air through a cold visor, there are some straightforward and typical reasons.

Riding in the early morning in the winter and during the rainy season is difficult since you can’t see ahead when a visor condenses. So what must we do to prevent the visor of our helmet from fogging up? To stop your visor from fogging up, you can perform a specific things:

Try Anti-fog Products

One of the useful fixes for the helmet fogging problem is this. Anti-fog products work well, but because their effects only last for 24 to 72 hours, they are just temporary. Make sure to cover the full surface of your visor with the anti-fog substance to create a coating.

If you drive bike carefully and seriously, you can reapply this spray as necessary. Sometimes the anti-fog spray’s efficiency degrades more than the visor fogging. In cold or humid weather, the efficiency of this anti-fog solution is reduced.

Open Your Visor And Vents

You may increase the airflow inside your helmet by opening the vents or your visor shield. The helmet’s temperature can be lowered through the open vents, which also allow moisture to escape. Before you leave, make sure the vents are open because doing so will help you avoid condensation. You can get more fresh air by opening the visor, but doing so can lead to another problem.

This can be problematic if it’s snowing or raining outside because you can’t use your visor to your advantage when it’s open. While the visor is open, you’ll breathe easier, but once you put it down, the condensation will start up again.

Heated Shield

An electric heated shield can be made with the same component that is used on a car’s rear window. Do not believe that the inside of your helmet gets hot; this is not its intended function. However, warming your shields will aid in reducing moisture buildup caused by breath. Depending on how frequently you take rides, you can select one of these heated shields.

They are frequently utilized for matters of safety and a pleasurable riding experience. You can purchase a heated shield to attach to your current helmet, even though heated shield helmets are slightly more expensive than conventional ones. However, not all brands support this.

Use An Anti-Fog Visor Insert or Pinlock Visor

There are two different kinds of helmets available, depending on whether they come with a pinlock or are pinlock-ready. Despite the fact that some manufacturers created their own anti-fog inserts, they were just as effective as the pinlock inserts. The pinlock, acting as a dual-pane visor, seals the air between the visor and itself. This method produces a double-glazed window look on the visor using a silicone bead.

You can use it if your visor is “pinlock ready,” which is to say if it has two tiny holes available. Use an anti-fog insert if the helmet visor isn’t what you’re searching for. Whether or not your helmet is pinlock-ready, you can still utilize this product.

Dual Pane visor

The most common visor that doesn’t require power since it functions like a pinlock is the dual-pane kind. The dual pane visor has two panes; the inner one doesn’t fog up while you breathe, while the outer one receives cool air. This is only possible because it is not cold.

Use An Anti-Fog Mask

You can cover your mouth and nose with an anti-fog mask from a number of different brands. The mask must be fastened within the helmet, however not all helmet models allow for this. These 99.9% efficient anti-fog masks ensure that motorcyclists don’t breathe in contaminated air while they are on the road. You can utilize different anti-fog masks that are designed to fit the majority of faces.

It will be possible for your helmet’s visor to breathe adequately away from your nose and upper cheekbones. The mask is compatible with full-face, modular, and even motocross helmets. This anti-fog mask is compatible with glasses if you frequently wear them when cycling.

Silicon-Based Water-Repellents

This is yet another approach to prevent fogging in your helmet. You must come up with a way to keep water off the helmet. Make careful to purchase and apply to the visor products that effectively repel water. You may carry on with the trip without any fogging problems thanks to it.

Wear a Neck Tube

To protect the rider’s mouth and nose, a neck tube can function similarly to a respirator mask. This neck tube can be fastened before putting on your helmet. This neck tube can be useful if your helmet doesn’t have the pinlock visor insert mechanism. Because you can easily take and insert the neck tube whenever you want, it’s one of the less expensive solutions.

Anti-Fog Coatings

It’s not a permanent fix, just like anti-fog spray, but it can keep you from fogging for a longer time. This may be the greatest option for you if you become tired of using anti-fog spray because it lasts for around a year to two years. The majority of manufacturers apply this anti-fog coating, so there is no need to be concerned. In addition, several grades of hydrophilic substances are used to clear the visor of fog.

CHECK NOW: Best Motorcycle Helmets 2022 Reviews – Top 13 Picks and Buying Guide

What’s The Benefit Of Helmet Visor Not Fogging?

We’ve included many anti-fog alternatives for your visor. You’ll gain from following them because they’re safe and make your headgear free. Benefits of a helmet visor that doesn’t fog up include:

  • Most significantly, it is secure if your visor is clear. Without any uncertainty, you can ride a motorcycle while seeing the road.
  • While driving, if your visor is foggy and you keep it open, you run the risk of being stung by bugs, stones, or other flying objects.
  • If you don’t apply any remedies and keep your visor up, it might be highly dangerous because you might have an accident.

What Can I Use To Clean My Motorcycle Helmet Visor?

You can use anti-fog solutions to clean the visor on your helmet, but you should first check to see if the cleaner is suitable with the visor’s material.

  • If your helmet has a pinlock insert, take it out first.
  • Check to see if the cleaning agent is in your anti-fog spray. Use this to quickly clean the visor of the helmet’s surfaces.
  • After that, repeatedly spray the front and rear with the cleanser. Most spray guns automatically break down the solutions into little pieces.
  • First, wait for the liquid to completely dry on the helmet visor. However, in the end, avoid using the anti-fog liquid spray.
  • Now wipe the remaining anti-fog liquid with a cloth.

Make sure to read the manufacturer’s directions before applying any anti-fog spray. As we previously said, certain visors contain an inside anti-fog coating.

This implies that if your helmet is of that type, you should treat it with additional caution. If your lid has a retractable sun protection, clean it as well. Otherwise, while riding in the sun, you’ll be able to see marks on it.

How To Make Your Own Anti-Fog Spray?

This is for you if you’re one of those DIYers. Here is a straightforward DIY anti-fog remedy you may use.

  • 1/4 cup water (Make sure you use distilled water).
  • rubbing alcohol, 1/4 cup
  • Add a drop of dish soap to the mixture.

Before applying them to your helmet visor, combine them all in a bottle and give it a good shake. Vinegar is a good alternative to alcohol if you’re on the fence.

  • a third of a cup of water (distilled water is preferable to tap water).
  • Vinegar should completely fill the cup.

Before using, combine all the ingredients in a spray container and shake it vigorously. There are also several affordable anti-fogging tricks available. A scuba diver is initially instructed to spit on the mask before submerging it. The visor may benefit from being naturally de-fogged by being spit on.

You can also rub the visor with a potato that has just been cut. As an alternative, you can apply baby shampoo or shaving cream on the helmet’s anti-fogging surface.

Conclusion

We have answered all of your questions regarding how to prevent fogging in a helmet visor. Hopefully, this article assisted you in locating the solution. Most of the time when I try one of these tactics, it really helps me. The pinlock visor, however, provides the most comfort. Even so, weigh your options before embarking on a bike without an anti-fog helmet visor.

After that, whenever you go for a ride, enjoy using the anti-fog helmet visor. Your ride will be more comfortable than ever thanks to it.

Also Read:

Leave a Comment